Hi all

This is really regarding my recent message regarding setting 
up a drummer "click track".

Well, it seems like I've had my i30 for 20 years, but I am 
still learning..... THANKS TO YOU!!!

I have successfully used the "metronome" settings (didn't 
even realize that metronome output settings were so flexible) 
and channeled it through "D output" (hence audio out "4"). I 
lost very little in the effects and as the i30 will be in a 
"live" environment, reverb effects are sometimes better switched 
off or very low.

Thanks again friends.

Pete C
Re: Metronome output
Mon Jan 14 18:44:51 2002


Hi Mike

Firstly I am working in SONG mode with sequences. I change the metronome 
out settings to "D" only. Next, I set all the tracks so that their "D" 
output is "0" - IMPORTANT: Make sure you press the RESET button just 
before doing this - (also note: there may be MIDI events in each track 
which reset the "D" output - these must be deleted). Having done that 
I change the "EFFECTS" placement to the one where C&D go direct to 3&4 
(no effect in-line) - I think it's the one on the bottom left of the 
placement screen - sorry, don't have my i30 here as I write this. You 
will probably find that the overall sound may change a bit - you can 
then adjust the "EFFECTS" settings to clean it up. SAVE YOUR CHANGES!!!!

The metronome click will play for the duration of the sequence from 
output "4", all other sounds will channel through outputs 1,2 and 3 
as per your settings. It is important to have those "intro bars" in 
place and to remove any unwanted bars beyond the end of the sequence.

All the best

Pete